Setalux D A 575 X

Setalux D A 575 X

  • 材料下载
  • 详细参数
  • 产物概述
  • 材料下载
  • Setalux D A 575 X

    Type                      Polyisocyanate cross-linking Acrylic Resin
    Characterization          Hydroxyl Content: approx. 3.7% on solid resin
    Form supplied             approx. 75 % in xylene
    Uses                      Primarily in combination with Desmodur® N grades, in

                              the formulation of two-component polyurethane

                              coatings with good resistance to accelerated and

                              outdoor weathering.
    Property                  Value         Unit of measurement       Method
    Hazen color value         ≤ 100                                DIN EN 1557
    Acid value                5 ± 2             mg KOH/g           DIN EN ISO 2114
    Viscosity at 23 °C       3500 ± 500        mPa·s             DIN EN ISO 3219/A.3
    Non-volatile content      75 ± 1            %                  DIN EN ISO 3251

    (1 g resin/ 1 h 125 °C,
    convection oven)
    Hydroxyl content, supply form 2.6 to 3.0     %                 DIN 53 240/2
    Water content            ≤ 0.1              %                 DIN 51 777/1

    Other data*
    Property                Value          Unit of measurement        Method
    Equivalent weight       approx. 610
    Density at 20 °C       approx. 1.06        g/ml              DIN EN ISO 2811-2
    Flash point             approx. 23          °C               DIN EN ISO 1523
    Hydroxyl content, solid resin approx. 3.7    %

    *These values provide general information and are not part of the product specification.

  • Setalux D A 575 X

    Solubility / thinnability     Setalux D A 575 X can be thinned to a solids content

                                  of 40 % with ketones,esters, ether esters, toluene,

                                  xylene and solvent naphtha® 100. The storage
                                  stability of the respective solutions must be tested
                                  Only PU grade solvents (< 0.05 % water, free of other

                                  reactive impurities)should be used.

    Compatibility                 Generally speaking, Setalux D A 575 X is miscible

                                  with the Desmodur® and Setalux D A grades listed.

                                  However, the combinations must be tested for their
                                  compatibility. Setalux D A 575 X can be mixed with

                                  Desmodur N 75, N 3390 and Z 4470 and with Setalux

                                  D A 365 and A 450.

    Properties / Applications     Setalux D A 575 X is mainly used in combination with

                                  Desmodur® N 75 and N 3390 in the formulation of

                                  high-solids two-component polyurethane coatings.

                                  These are fast-drying and yield films which are

                                  highly flexible,lightfast and weather-stable.

    Storage                       When stored in sealed containers at temperatures

                                  not exceeding 30 °C, the product will remain

                                  stable for 12 months.

    Labeling and REACH applications  This product data sheet is only valid in

                                     conjunction with the latest edition of the
                                     corresponding Safety Data Sheet. Any updating

                                     of safety-relevant information
                                    – in accordance with statutory requirements

                                    – will only be reflected in the Safety
                                    Data Sheet, copies of which will be revised and

                                    distributed. Information relating to the current

                                    classification and labeling, applications and

                                    processing methods and further data relevant to

                                    safety can be found in the currently valid Safety
                                    Data Sheet.